Cabinets - The box (August 1, 2008)

Posted on August 1, 2008 - Filed Under Cabinet Box, Kitchen Cabinet Doors | Leave a Comment

Kitchen Styles - Cabinets - The box

First you should understand what lies behind the cabinet door¡ªthe cabinet box. Your response may be a smug, Duh! But cabinet construction can get complicated rather quickly. There¡¯s more going on than you might think. It breaks down by:

• Framed construction 
  
• Frameless construction

 In framed cabinets, wood joinery holds the parts together. Horizontal rails and vertical stiles secure the door to the box. In frameless cabinets, special hardware fittings do both jobs. Because no rails or stiles block the way, frameless cabinets offer slightly easier access to their interiors.

You might be surprised to learn that solid wood rarely forms the cabinet box. It's more often used in face frames and doors than in the larger side panel parts. That's because it tends to warp'a special concern in the kitchen where the moisture level changes frequently. But in the doors, using multiple strips of lumber in a variety of sizes can reduce the warp factor. A floating panel might also be used. The panel floats because instead of being glued to the doorframe, its edges sit between wooden grooves, allowing the wood to move more freely with changes in the kitchen's humidity.

Box materials typically contain wood chips, other wood by-products, and synthetic additives to make them especially strong and warp resistant. 

Your options for box material include:

• Plywood
  
• Particleboard or furniture-grade flake board
  
• Medium-density fiberboard

All have solid reputations for durability and screw-holding power, particularly plywood. Medium-density fiberboard has gained a following for its ability to be formed into door and drawer heads and other decorative features. Furniture-grade flake board offers a stronger alternative than particleboard, which you'll pay the least for. 

Often the door and box will be constructed of different materials. A cabinet door might be solid maple and the sides plywood covered with a maple veneer. The same finish would be applied to both, unifying the look. Or you may decide you want different tones on the door and the sides to add contrast.

You'll want to make sure you know if the finish you like requires a certain base material, and you'll want to check out examples of your manufacturer's work. Beware of staples! Staples will pull apart. You want cabinets with thick panels that have been corner blocked and glued or fastened with screws.

Kitchen Cabinet, China Kitchen Cabinets, Bathroom Cabinet, Kitchen Utensil, Wardrobes , Kitchen Cabinet Door, Modern Kitchen Furniture, Custom Kitchen Cabinet, Kitchen Design, Kitchen Appliance, Kitchen Accessories, Bathroom Vanity, Armoires,Closets,Traditional Kitchen Collection by Modernday

Other News:

< Back >