Kitchen & Bathroom NewsChina Kitchen CabinetsKitchen CabinetsBathroom Vanities,China Kitchen Furnitures,Kitchen Door Panel,Wardrobes,ClosetsKitchen & Bathroom Cabinets,China Kitchen Cabinetry,Bathroom Cabinets,Cabinet Doors,Armoires,European Kitchen Cabinets,Italian Cabinets,Vanities,Modern Kitchen,Traditional Kitchen,China Whiteboard,American Style Kitchens,Kitchen CabinetryKitchen Cabinets,Modular Cabinets,Base Cabinets,Wall Cabinets,Wardrobes & Closets,Armoires General care instructions,handles,worktops,ultra high gloss,high gloss laminate,high gloss lacquer,wood,laminate,velvet matt surface care instructions ... |
Home >> News >>
How to Install Hardware on New CabinetsHow to Install Hardware on New Cabinets,How to Install,Install Hardware on New Cabinets,New Cabinets,Perfect for the Door,Installing hardware,installation of pulls,knobs,cabinet doors and drawers,installing the screw,Mark the drawer,drawer front,measure,hardware requires two screws,screws and markHow to Install Hardware on New Cabinets (June 11, 2009) Perfect for the Door Installing hardware on new cabinets can be easily accomplished. This article focuses on the installation of pulls or knobs on cabinet doors and drawers. A pull requires two screws to attach, a knob just one. Step 1 If installing hardware that requires two screws, be certain the space between the two holes that you drill are precise. Drill the holes from the front of the door instead of the back, as splintering may occur. Step 2 Clean any splintering off the back of the door before installing the screw into the hole. Insert a screw through one of the holes and align it with the back of the hardware. If two screws are required, do not tighten the first one before starting the second. Step 3 Mark the drawer where your hardware will be installed. In most cases, it will be centered on the drawer front. Step 4 Measure the center of the drawer front; measure both the width and height. Step 5 If this hardware requires two screws, split the difference of the space between the two screws and mark the drawer front accordingly. For example, if there is a 3-inch space between the screws in the hardware, mark 1½ inches in either direction of the center mark. Things You'll Need:
Other News:
|
||
Site Map | Rsspot magnets, beauty machine, brass tubes, whiteboard supplier,magnet, cutting edge, , , | Ferrite Magnets | Kitchen & Bathroom Cabinets | Kitchen Cabinets | China Kitchen Cabinets | Bucket Tip | Office Chairs | Dining Tables & Chairs | Bucket Tooth, Spare Parts, Power Tools Accessories ,Pet Toy,Beauty Equipment, Bucket Teeth, | Magnets | China whiteboard | Neodymium Magnet, | Permanent Magnets | Pot Magnet | Ndfeb Magnet | White Board | Glass Whiteboard| Whiteboard Supplier | Whiteboard Manufacturer | Whiteboard | Bucket Tooth, Spare Parts, Power Tools Accessories ,Pet Toy,Beauty Equipment, Bucket Teeth, Stamping Parts | Bonded Magnet | Cabinet Hardware
